RIDGID 72553 Model RP 115 Mini Press Tool and Battery Kit with 1/2″ to 3/4″ ProPress Press Tool Jaws, 2V Li/Ion Battery, 12V Charger, and Carrying Case , Red

One of the best tool purchases I have ever made Thought about getting the Dewalt or Milwaukee version but went with rigid because of the price. Since then, I compared to a friends miluakee and this rigid is easier to get into small spaces. For the most part they are the same. If you don't need to use pipe/fittings larger than 3/4" there is no need to get one of the more expensive ones. This thing is awesome and has been a game changer for me. I can sawp out a water heater and install a new one with an expansion tank in a fraction of the time it took before.

Very satisfied The tool works great! Seems very well built. Would give it 5 stars but the case is very cheap. Hinges broke after one week of use.

Great product ! It's a cool machine, light and functional, fits easily into tight and hard to reach places, so far I haven't had any problems with it, it works flawlessly, I recommend this equipment, it saves time and money, the transaction itself was successful, fast shipping, well secured

Almost TOO easy! I'm a contractor and, while I don't do plumbing every day, I do enough of it that I use ProPress fittings occasionally along with PEX and/or solder to make repairs or additions to customers' systems. I have been using a manual press to install ProPress fittings but I had a job for a good custome that was in a tight space that would make using a manual press difficult or impossible to use due to the space needed for the press handles. So I sprung for this tool. Yes, it's expensive for occasional use, but for me it was worth it. It fits in tight spaces and is so easy to use that it feels like I'm cheating! Now that I have both Pex and ProPress tools, solder and torch are pretty much retired. Note that this tool won't do anything larger than 3/4", but in residential work, I rarely see anything larger than that anyway. So, win/win!

No for small spaces Perfect gif for my wife, she will liked for the price, personally not enough power, no angle rings made for this model and use is limited for open space only, was not advice on any advertising NO BUY

Works great for me Came new and works great. Nice and compact. This rp115 is the best deal. If your not doing the larger pipe sizes you won't be disappointed with this thing.

READ THIS NOW TO SAVE $$$ 500 This will be an excellent tool for experienced plumber to DIY person. I have been doing plumbing over 18 years now and I can say this thing is a life saver. If you want to marry anyone it should be this tool. I have always chosen to solder copper joints its all I knew. It is also the strongest and best connection. However with soldering you have to correctly clean the pipe, correctly heat up the fitting, handle the torch with open flame (very difficult in tight spaces and fire hazard, near impossible to solder with water still running etc. Now don't get me wrong i have always gotten the job done no matter how difficult, but soldering is a skill that takes alot more expertise . Then I started hearing about propress so I bought the manual propress tool for about $100 bucks. It does work and if you are on a budget and only doing couple jobs a year that would be best for you. However doing water tanks, boilers, washing machine set up, faucets kitchen and bath etc, using propress just made life 10x easier. I still solder many connections where space and time allows but its about 60/40 now with propress. It take me 2-3 minutes to replace a water shutoff valve with propress. it cane take even 15 or more with soldering. I can also take just 3 tools to a job, this ridgid propress machine, a deburing tool (ridgid as well), and the auto cutter. Cut debur and the press and done. If I was going to solder- I would need my gas tank, torch head, flexible extention house(optional I use this so i dont have to hold the tank great for tight spaces), thinning flaux, solder, auto cutter, deburing too, and sponge to wipe off excess flaux off the pipe. I lso would need to make sure to remove anything that might catch a flame , even the fitting you have to be careful not to over heat. So all in all I'm using propress 40% more.Now for the tool it self-ProLight weight- you can literally hold it in one hand. it weights as much as say and impact drill.the heads are easy to change out. takes less than a minute and holds securlyKit includes 1/2 and 3/4 attachment (which is all you need 90% of the time).kit includes a carrying case to keep everything in one place (bonus you can leave the last attachment you used on. so when you done put tool with attachment back in the case.led light for extra lightingto press a fitting you just attach and press a buttonvery small tool and clapping a fitting is easier than the manual tools because those require more clearance to go 360 degree around the fitting while this one only need about 180 degress to be able to get around the fitting.recommended for under sinks, basements, water tanks, (indoor use only), tight spaces, commecial application so you wont need fire permits, DIY, landlords, handymen, and professionals.PRICE- its one of the cheapest professional quality press tools but I also have this as a con because well it is still alot to shell out on a tool.Con,the case is flimsy and feels cheapfor the price the pex fitting should be included atleast 1.I forget after how many thousand pressing you are supposed to get it recalibrated. (however honestly if used it that much and didn't save or make enough to pay for this 100x over you did something wrong.PRICE- its worth it but I can buy a used car for this price

Impressive little unit. Im just a guy with a pro press thats hates sweating copper. Im not a plumber, but this tool has enabled me to make so many home repairs I thought was out of my reach and comfort zone. I recently used the tool to relocate an Ice maker water line to a different area. I had to work in a crawl space under the house and the unit is light enough to handle one handed in really small spaces and the presses come out perfect every time. This unit is good value for money as compared to the Milwaukee for DIY guys/gals. Before I bought this I did purchase a manual press tool off amazon, it was clunky to use and never gave good feedback as to when the press was done, however with this unit you always know when its done because the unit automatically let go of the crimp.